Five things account for nearly every pool leak in Calpe: a structural crack in the shell, failed grout or tile joints, a leaking fitting, buried pipework, or something on the equipment side.
Which of the five it is can usually be narrowed down from how the pool is losing the water — before anyone drains or opens anything.
What you are seeing, and what it usually means
| What you are seeing | Most likely cause |
|---|---|
| The loss gets worse when the pump runs | Pressure-side pipework, or a return fitting |
| The loss is the same with the pump off | The shell, the finish, a tile joint or a skimmer |
| Loose tiles or crumbling grout at the waterline | Failed grout or tile joints |
| Damp ground beside the pool | Buried pipework, or the shell itself |
| Damp around the pump and filter | Valves, connections or equipment |
| A visible crack in the shell or finish | Structural crack |
| Movement around a skimmer, light or inlet | A failing fitting or seal |
| The level drops and nothing is visible anywhere | Needs detection before anything is opened |
None of these is a diagnosis on its own. What they do is tell a technician where to start, which is the difference between an afternoon and a week.
In this article
The five causes in detail
1. Structural cracks in the shell
Movement, wear or surface deterioration opens a crack in the shell, and water goes through it slowly or continuously.
How it presents: a steady loss that does not change much whether the pump is running or not. The crack is often leaking before it is visible, which is why “I can’t see anything” does not rule it out.
2. Failed grout or tile joints
Grout deteriorates and tiles work loose, and water escapes through the finish rather than through the structure.
How it presents: usually at or near the waterline, or along tiled sections. If you can pick at the grout with a fingernail and it comes away, that is the answer. This one you can often see before it becomes expensive.
3. Failing fittings
Skimmers, return inlets, lights and their seals sit under constant pressure at the point where they meet the structure, which is exactly where two different materials have to stay watertight for twenty years.
How it presents: the level often settles at the height of the failing fitting and then stops dropping. If your pool loses water down to the skimmer and then holds, look at the skimmer.
4. Pipework and underground plumbing
A leak in a buried line or a circulation pipe, with nothing visible inside the pool at all.
How it presents: damp or unusually green ground near the pool or along the run to the equipment, and a loss that changes when the pump runs. This is the one that most often needs locating before anything is dug.
5. Equipment-side faults
Damaged valves, connections, or leaks around the pump and filtration components.
How it presents: damp at the plant rather than at the pool, and it is the easiest of the five to confirm — go and look at the equipment while the pump is running.
Is it a leak at all?
Worth settling before anything else. A pool on this coast loses a genuine amount of water to evaporation through the summer, and a fair number of suspected leaks turn out to be a hot fortnight with the cover off.
The signs that it is more than evaporation: topping up more often than usual, the level falling quickly, damp ground near the pool or the equipment, loose tiles or failing grout, cracks in the shell or finish, more loss when the pump runs, or moisture and movement in the surrounding area. Pool losing water? Evaporation or leak? covers how to measure it properly.
Why pools fail this way in Calpe
The causes are the same anywhere. What is different here is how long they run before anyone notices.
Pools at villas, rentals and holiday homes get used unevenly — hard for a few weeks, then nothing for months. Uneven use hides both the wear and the water loss. Nobody is watching the level between visits, and a pool that drops twenty centimetres over a winter looks, to someone arriving in spring, like a pool that simply needs topping up.
On top of that: sun and weather on the finishes, ground movement under the shell, and fittings and joints that age whether the pool is used or not.
The real risk is never the leak on the day it starts. It is the leak that runs a whole season and takes the surrounding ground, the finishes or the connected systems with it.
When leak detection is needed
When the loss continues and the source is not visible — particularly once evaporation has been ruled out. It is also worth it where there are already cracks, wet ground, movement at a fitting, or water loss nobody can explain.
Repairing the wrong area first is the expensive mistake. It costs the repair, it costs the time, and the pool still leaks. Detección de fugas en piscinas exists precisely so that the first repair is the right one.
Where visible structural damage turns up, the follow-up is usually crack repair, lechada, sustitución de baldosas o reparación submarina — the last of which deals with the fault without emptying the pool.
Cómo puede ayudarle 100% Plumbing
We assess the pool, check the likely problem areas in the order the symptoms suggest, and recommend a repair that addresses the cause rather than the nearest visible damage.
The first repair should be the right one, not the easiest to reach.
We offer our own comprehensive guarantee for the work we carry out.
Verified reviews from customers across the Costa Blanca.
Read next
¿Quién puede reparar una fuga en la piscina de Calpe?
If the pool is outside Calpe, pool leak repairs near Benissa, Moraira and Altea covers those towns. Our full range is on the piscinas y swimming pool repairs páginas.
Related Services
Calpe · Benissa · Moraira · Teulada · Benitachell · Javea · Denia · Jalon · Pego · Orba · Altea · Alfaz · Albir · La Nucia · Callosa · Finestrat · Oliva · Gandia
Not sure which of the five it is?
Tell us how much it drops in a day, whether that changes with the pump running, and whether the ground is damp anywhere. That usually gets us close before we arrive.
24h emergency help line · 607 415 520

